跳至产品信息
1 / 1
Athena Nutrients US flag

Official Reseller

Provision Gardens is an official reseller of this brand.

Our inventory is sourced directly from the manufacturer and/or authorized distribution partners. We do not sell used items or unverified/old stock. This helps ensure product authenticity, freshness, and the high standard you expect.

Athena Nutrients 混合钙镁肥 - 5 加仑

OTHER AVAILABLE SIZES / MODELS:

Store Availability
数量
In-Store Pickup Only
Special Order Item — Please Contact Us

Description

Description
Athena Nutrients混合系列CaMg是一种液体矿物肥料,也是钙、镁和铁的补充剂,专为水培种植中需求旺盛的生长阶段而设计。它旨在帮助解决在大量生长和发育过程中可能出现的常见钙镁和铁缺乏问题,同时保持整体元素平衡的稳定。

CaMg专注于种植者在快速生长的花园中最常追求的三种次要元素:钙、镁和铁。它旨在帮助纠正常见的钙/镁/铁缺乏症,而不会使您的营养方案失衡,这在植物加速生长且微小不足会迅速显现时尤为宝贵。除了这些矿物质外,它还在其营养成分中提供硝酸盐氮,发挥更完整的“钙镁补充剂”作用,而不是作为单一元素添加剂。

一个简洁的事实层:CaMg的额定值为2-0-0。这使其成为一种支持性的、以氮为主的补充剂,旨在补充而非替代完整的基肥营养方案。当您的花园需要额外的次要元素支持时,2-0-0的配比使其在弥补钙和镁需求的同时,仍能提供有用的氮。

在成分基础上,CaMg源自硝酸钙铵、氯化钙、硝酸镁和EDTA铁。这种铁源是该产品被描述为提供螯合铁的关键部分,有助于在实际水培条件下保持铁的可靠性。

在系统适用性方面,CaMg仅适用于水培。据描述,它在反渗透水设置和惰性介质中特别有用,包括椰糠和岩棉。这些环境更容易出现钙、镁和铁的不足,因此手头有专门的钙、镁和铁补充剂有助于在条件苛刻时保持生长正常。

这非常适合使用反渗透水或惰性介质的水培种植者,他们希望获得一种液体矿物肥料,该肥料能支持整体元素平衡,同时帮助解决常见的钙/镁/铁缺乏症。如果您正在寻找一种含有螯合铁、硝酸盐氮和经验证的2-0-0配比的钙镁补充剂,Athena Nutrients混合系列CaMg正是为此而生。

产品优点:营养生长阶段;开花阶段;室内;室外;常规浇水;浇水系统;水培;椰糠安全;土壤;无土;缺乏症支持;生长支持;反渗透水支持;元素平衡。

保证分析:硝酸盐氮(N):2.0%;钙(Ca):2.1%;水溶性镁(Mg):1.1%;螯合铁(Fe):0.06%。

源自:硝酸钙;硝酸镁;EDTA铁。

How To Use

How to Use Athena Nutrients 混合钙镁肥 - 5 加仑

Step-by-step mixing and feeding instructions for Athena Nutrients 混合钙镁肥 - 5 加仑.

Mixing & preparation

Fill your reservoir or watering container with clean, room-temperature water first. Shake the bottle of Athena Nutrients 混合钙镁肥 - 5 加仑 well before every use. Using the feeding schedule below, measure the recommended dose and add it directly to the water while stirring. Allow the solution to mix fully before adding any other fertilizers, additives, or supplements.

Always add nutrients to water — not the other way around. Mix thoroughly between products to ensure an even, stable nutrient solution.

Week-by-week feeding schedule

Vegetative stage — CaMg

  • Week 1: mix 0.8 ml per litre of water or nutrient solution.
  • Week 2: mix 0.8 ml per litre of water or nutrient solution.
  • Week 3: mix 0.8 ml per litre of water or nutrient solution.
  • Week 4: mix 0.8 ml per litre of water or nutrient solution.

Flowering stage — CaMg

  • Week 1: mix 0.8 ml per litre of water or nutrient solution.
  • Week 2: mix 0.8 ml per litre of water or nutrient solution.
  • Week 3: mix 0.8 ml per litre of water or nutrient solution.
  • Week 4: mix 0.8 ml per litre of water or nutrient solution.
  • Week 5: mix 0.8 ml per litre of water or nutrient solution.
  • Week 6: mix 0.8 ml per litre of water or nutrient solution.
  • Week 7: mix 0.8 ml per litre of water or nutrient solution.
  • Week 8: do not use this product during this week of flowering.
  • Week 9: do not use this product during this week of flowering.
Tips for best results
  • Maintain pH and EC/ppm within the range recommended for your growing medium and crop.
  • Use fresh nutrient solution whenever possible and avoid leaving mixed solution stagnant for long periods.
  • Store nutrients in a cool, dark place away from direct sunlight and extreme temperatures.
  • Keep bottles tightly sealed when not in use to reduce air exposure and preserve product quality.
  • Use clean measuring tools and regularly rinse or clean your reservoir, lines, and irrigation equipment.
Common mistakes to avoid
  • Do not mix different nutrients or additives together in concentrated form before adding them to water.
  • Do not exceed the recommended dosage unless you are following a tested, crop-specific feeding plan.
  • Do not skip pH or EC/ppm checks when growing in hydroponic or soilless systems.
  • Do not allow the nutrient solution to freeze or overheat, as this can damage the formulation.
  • Do not ignore the directions on the product label for your specific crop, growth stage, and system type.

Warnings & Safety

Important – Safety Information

This product may cause mild skin irritation and eye irritation. Avoid unnecessary contact with skin, eyes, and clothing. Use only as directed.

General Safety Precautions

Read and follow all instructions on the product label and any accompanying documentation before use. Keep out of reach of children and pets. Do not ingest. Avoid breathing vapours, mist, or dust that may be generated during handling or use.

Wear appropriate personal protective equipment (PPE), such as protective gloves, long sleeves, long pants and closed-toe footwear. When there is a risk of splashing or airborne particles, use safety glasses or other suitable eye and face protection.

First Aid – Skin Contact

IF ON SKIN OR HAIR: Remove contaminated clothing immediately. Rinse skin with clean water for several minutes, then wash with mild soap and water. If irritation or redness develops and persists, seek medical attention. Wash contaminated clothing before reuse.

First Aid – Eye Contact

IF IN EYES: Rinse cautiously with clean water for several minutes, keeping eyelids open. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, obtain medical advice.

First Aid – Ingestion

IF SWALLOWED: Rinse mouth thoroughly with water. Do not induce vomiting unless instructed by a medical professional. Seek medical attention if you feel unwell.

First aid – Inhalation

IF INHALED: Move the person to fresh air and keep them comfortable for breathing. If coughing, breathing difficulty, dizziness or other symptoms occur, seek medical assistance.

Storage And Handling

Store this product in its original closed container, in a cool, dry and well-ventilated area. Protect from extreme temperatures and direct sunlight. Keep container tightly sealed when not in use.

Avoid release to drains, natural waterways or outdoor soil. Dispose of unused product and empty containers in accordance with local regulations and the directions on the label.

Important – Medical

If medical advice is needed, keep the product label or container available. Always follow the specific instructions and safety recommendations provided by the manufacturer. This safety notice is intended as general guidance and does not replace official label directions or documentation.

Guaranteed Minimum Analysis

Derived From

Frequently Asked Questions

What does nitrate nitrogen (N) do for plants?

Nitrate Nitrogen provides a stable, easy-to-absorb form of nitrogen that supports steady growth, strong foliage, and reliable plant development without sudden nutrient swings.

Why is calcium important for plant growth?

Calcium is important because it builds and stabilizes plant cells as they form, acting as the structural support that keeps new growth strong and functional. Unlike other nutrients that drive color or speed of growth, calcium’s role is unique because it controls cell wall strength and membrane stability, making it essential for healthy roots, shoots, and long-term plant resilience rather than quick visual results.

Why is water soluble magnesium important for plant growth?

Water soluble magnesium is important because it quickly restores the plant’s ability to make chlorophyll and produce energy, which helps stop interveinal yellowing on older leaves and improves overall nutrient use; it’s unique because it becomes available immediately in water, making it faster and more predictable than slower magnesium sources.

Why is chelated iron important for plants, and what makes it different from other iron sources?

Chelated iron is important because it keeps iron usable for plants even when growing conditions would normally lock iron out, helping prevent the classic yellow-new-leaf symptom caused by low chlorophyll production. It is unique from other iron sources because the chelation protects iron from becoming insoluble, making it a more reliable way to correct iron-related chlorosis when regular iron can fail.

Why do growers use calcium nitrate instead of other calcium sources?

Calcium nitrate is important because it supplies calcium in a fast, highly available form that supports strong new growth and healthy root tips, while also providing nitrate nitrogen for steady, usable growth energy. It’s unique because it delivers calcium together with nitrate nitrogen, making it especially effective during rapid growth phases when plants need both structure-building calcium and immediately available nitrogen at the same time.

What does magnesium nitrate do for plants?

Magnesium nitrate supplies fast-available magnesium for chlorophyll and photosynthesis while also adding nitrate nitrogen that can speed up greening and growth. It’s unique because it can correct magnesium-related yellowing quickly but also changes growth momentum, so it’s most valuable when magnesium is truly limiting and the plant can safely use extra nitrate.

What makes iron EDTA effective for fixing pale new leaves?

Iron EDTA keeps iron dissolved and available long enough for roots to absorb it, which is why it can quickly improve new growth color when iron is tied up in the root zone. It’s unique because the EDTA chelate balances stability and accessibility, making iron more reliably usable in mildly acidic to near-neutral conditions compared to many non-chelated iron forms.

Safety & Technical Documents

查看完整详细信息
Nutrient Feed Chart

Vegetative — CaMg

Flowering — CaMg

Product Comparison