跳至产品信息
1 / 1
Power Si US flag

Official Reseller

Provision Gardens is an official reseller of this brand.

Our inventory is sourced directly from the manufacturer and/or authorized distribution partners. We do not sell used items or unverified/old stock. This helps ensure product authenticity, freshness, and the high standard you expect.

Power Si 原味 - 500 毫升

Power Si 原味 - 500 毫升

常规价格 $149.99
常规价格 促销价 $149.99
结账时计算的运费

OTHER AVAILABLE SIZES / MODELS:

门店库存
Winnipeg, Manitoba
可用的
Barrie, Ontario
不可用
Newmarket, Ontario
不可用
Pickering, Ontario
不可用

您选择的取货地点缺货?我们会自动从其他地点调货,确保您选择的取货地点有货。(仅限安大略省)

Province:
Choose your province
Order Within:
Estimated Delivery:
Free Shipping (Canada):
Free Shipping (Ontario):
数量
符合免运费促销条件

Description

Power SI Original 是一种浓缩的二氧化硅生物混合物,含有高生物利用度的二氧化硅,可提高养分吸收率,促进植物更强壮地生长。

Power SI Original 是一款专有的浓缩硅生物混合物,它将高生物利用度的硅与微量和大量营养元素相结合,以支持作物日常生长。其氮磷钾比例为 1-3-1,易于添加到营养方案中,而不会使其成为高浓度的基础肥料。其成分表结构紧凑,包含源自硅酸钾的可溶性硅,以及尿素、磷酸和钼酸钠等关键成分。

其核心性能在于提高养分吸收和生物利用度。Power SI Original 通过促进养分吸收和提高养分生物利用度,能够更有效地利用植物环境中已有的养分。这种运输作用与结构支撑相结合,有助于构建更强健的细胞壁,从而使植物更加强壮健康,茎秆更加粗壮。

Power SI Original 的设计旨在促进更快生根,从而在繁殖和移栽过程中更有效地帮助幼苗早期成活。在持续生产中,它有助于减少作物盐分积累和脱水,在环境趋于干燥或投入量波动时,维持更稳定的根系环境。

环境变化会迅速反映在植物冠层上,而 Power SI Original 还能帮助纠正因环境胁迫和营养失衡导致的节间距伸长。这种节间距支撑有助于保持植物生长更加均匀可控,尤其是在植物快速生长时。

Power SI Original 非常适合那些想要高生物利用度二氧化硅和低 NPK 含量,以及支持更粗壮的茎秆、促进更快生根、并在要求苛刻的作物周期中增加养分吸收的种植者。

How To Use

How to Use Power Si 原味 - 500 毫升

Step-by-step mixing and feeding instructions for Power Si 原味 - 500 毫升.

Mixing & preparation

Fill your reservoir or watering container with clean, room-temperature water first. Shake the bottle of Power Si 原味 - 500 毫升 well before every use. Using the feeding schedule below, measure the recommended dose and add it directly to the water while stirring. Allow the solution to mix fully before adding any other fertilizers, additives, or supplements.

Always add nutrients to water — not the other way around. Mix thoroughly between products to ensure an even, stable nutrient solution.

Week-by-week feeding schedule

Vegetative stage — Power Si Original

  • Week 1: mix 0.13 ml per litre of water or nutrient solution.
  • Week 2: mix 0.13 ml per litre of water or nutrient solution.
  • Week 3: mix 0.13 ml per litre of water or nutrient solution.
  • Week 4: mix 0.13 ml per litre of water or nutrient solution.

Flowering stage — Power Si Original

  • Week 1: mix 0.13 ml per litre of water or nutrient solution.
  • Week 2: mix 0.13 ml per litre of water or nutrient solution.
  • Week 3: mix 0.13 ml per litre of water or nutrient solution.
  • Week 4: mix 0.13 ml per litre of water or nutrient solution.
  • Week 5: mix 0.13 ml per litre of water or nutrient solution.
  • Week 6: mix 0.13 ml per litre of water or nutrient solution.
  • Week 7: mix 0.13 ml per litre of water or nutrient solution.
  • Week 8: do not use this product during this week of flowering.

Tips for best results

  • Maintain pH and EC/ppm within the range recommended for your growing medium and crop.
  • Use fresh nutrient solution whenever possible and avoid leaving mixed solution stagnant for long periods.
  • Store nutrients in a cool, dark place away from direct sunlight and extreme temperatures.
  • Keep bottles tightly sealed when not in use to reduce air exposure and preserve product quality.
  • Use clean measuring tools and regularly rinse or clean your reservoir, lines, and irrigation equipment.

Common mistakes to avoid

  • Do not mix different nutrients or additives together in concentrated form before adding them to water.
  • Do not exceed the recommended dosage unless you are following a tested, crop-specific feeding plan.
  • Do not skip pH or EC/ppm checks when growing in hydroponic or soilless systems.
  • Do not allow the nutrient solution to freeze or overheat, as this can damage the formulation.
  • Do not ignore the directions on the product label for your specific crop, growth stage, and system type.

Warnings & Safety

Warning – Important Safety Information

This product may cause mild skin irritation and eye irritation. Avoid unnecessary contact with skin, eyes, and clothing. Use only as directed.

General safety precautions

Read and follow all instructions on the product label and any accompanying documentation before use. Keep out of reach of children and pets. Do not ingest. Avoid breathing vapours, mist, or dust that may be generated during handling or use.

Wear appropriate personal protective equipment (PPE), such as protective gloves, long sleeves, long pants and closed-toe footwear. When there is a risk of splashing or airborne particles, use safety glasses or other suitable eye and face protection.

First aid – skin contact

IF ON SKIN OR HAIR: Remove contaminated clothing immediately. Rinse skin with clean water for several minutes, then wash with mild soap and water. If irritation or redness develops and persists, seek medical attention. Wash contaminated clothing before reuse.

First aid – eye contact

IF IN EYES: Rinse cautiously with clean water for several minutes, keeping eyelids open. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, obtain medical advice.

First aid – ingestion and inhalation

IF SWALLOWED: Rinse mouth thoroughly with water. Do not induce vomiting unless instructed by a medical professional. Seek medical attention if you feel unwell.

IF INHALED: Move the person to fresh air and keep them comfortable for breathing. If coughing, breathing difficulty, dizziness or other symptoms occur, seek medical assistance.

Storage and handling

Store this product in its original closed container, in a cool, dry and well-ventilated area. Protect from extreme temperatures and direct sunlight. Keep container tightly sealed when not in use.

Avoid release to drains, natural waterways or outdoor soil. Dispose of unused product and empty containers in accordance with local regulations and the directions on the label.

Important: If medical advice is needed, keep the product label or container available. Always follow the specific instructions and safety recommendations provided by the manufacturer. This safety notice is intended as general guidance and does not replace official label directions or documentation.

Guaranteed Minimum Analysis

Frequently Asked Questions

What does available phosphate (P₂O₅) do for plant growth?

Available Phosphate (P₂O₅) supports root development, energy transfer, and early structural growth by providing a form of phosphorus that plants can absorb and use quickly.

Why is molybdenum (Mo) important for plant growth?

Molybdenum is important because it helps plants convert nitrogen into usable building blocks for chlorophyll and growth, and it’s unique from many nutrients because it mainly supports enzyme-driven “nutrient use” rather than directly building plant tissue.

Why is soluble potash (K2O) important for plants?

Soluble potash (K2O) is important because it helps plants control water use, move sugars to new growth and fruit, and build stronger, higher-quality structure under stress. It’s unique from many other nutrients because it acts more like a regulator and transport helper than a direct “building material,” so the biggest benefits show up as steadier growth, stronger stems, and better finishing instead of just bigger leaves.

Why is soluble silicon important for plant growth?

Soluble silicon is important because it strengthens plant tissues and improves stress tolerance, helping plants stay upright, conserve water better during heat or drought, and handle disease and pest pressure more effectively. It’s unique from most nutrients because it doesn’t mainly “feed” growth directly; it helps plants protect and reinforce the growth they’re already building.

Why is urea nitrogen important for plant growth?

Urea nitrogen is important because it can supply a high-impact source of nitrogen that supports chlorophyll production and fast leafy growth, but it’s unique from other nitrogen forms because it usually must convert in the growing environment before roots can use it consistently, making correct application and conditions critical for avoiding loss, burn, or sudden imbalance.

Can phosphoric acid cause nutrient lockout?

Yes, it can if it pushes phosphorus too high or drives pH too low, because both conditions can reduce the plant’s ability to take up key micronutrients and calcium even when they’re present in the feed, which makes phosphoric acid uniquely powerful compared with slower, gentler phosphorus sources.

Is potassium silicate mainly for potassium or for silicon?

Potassium silicate is mainly used for silicon, because the silicate portion helps plants build tougher tissues and handle stress better, while the potassium is usually a secondary contribution. It’s unique because it can improve plant structure while also strongly raising root-zone pH, so it needs more care than most similar inputs.

What does sodium molybdate do for plants?

Sodium molybdate supplies molybdenum, a trace micronutrient that helps plants convert nitrate nitrogen into usable building material, so growth and green color stay steady; it’s unique because it works as a tiny-dose “nitrogen unlocker” rather than a bulk nutrient.

Why can urea burn plants even though it’s a common nitrogen fertilizer?

Urea can burn plants because it must convert in the root zone, and that conversion can create a concentrated, temporarily harsh micro-zone that stresses roots, especially if urea is piled, left on the surface, or not watered in. That conversion step is what makes urea unique compared with nitrogen forms that are already plant-available, so correct placement and moisture are critical.

Safety & Technical Documents

查看完整详细信息
营养饲料表

Vegetative — Power Si Original

Flowering — Power Si Original

产品对比