跳至产品信息
1 / 1
FloraFlex US flag

Official Reseller

Provision Gardens is an official reseller of this brand.

Our inventory is sourced directly from the manufacturer and/or authorized distribution partners. We do not sell used items or unverified/old stock. This helps ensure product authenticity, freshness, and the high standard you expect.

FloraFlex 大包装 B - 5 磅

常规价格 $96.25
常规价格 促销价 $96.25
结账时计算的运费
门店库存
预计送达日期
秩序井然
预计送达时间
Choose your province
数量
Not Eligible for Free Shipping

Description

FloraFlex Bulky B 是一种水溶性促花刺激肥料,旨在为植物在开花初期和中期提供必需的营养,促进其旺盛生长。这是一款专为追求简洁、目标明确的促花配方的种植者设计的开花期营养补充剂。

Bulky B 以开花期营养为核心,其成分配比强调磷和钾的支持,同时提供关键的次生和微量营养元素。在开花初期和中期,这种组合旨在当生长重心转向花朵发育时,支持植物强劲、稳定的表现。因此,这款促花刺激剂能够完美融入开花期方案,而不会变成复杂且重复的产品“堆叠”。

由于 Bulky B 是一种水溶性配方,它常被用于注重一致性并以在开花期内提供可靠营养为目标的灌溉系统。它被定位为开花初期和中期的直接选择,而非通用型基础肥料,有助于确保您的开花营养有针对性且目标明确。

成分含量清晰简洁:Bulky B 提供磷和钾,还含有镁和硫,以及微量的钼。这些元素是植物在开花期间维持健康生长过程和构建花朵结构所必需的关键营养物质。如果您正在调整开花期营养补充剂,这种有针对性的矿物质支持可以帮助植物在整个周期中最关键的阶段保持良好状态。

主要成分明确且纯净。Bulky B 以磷酸二氢钾和硫酸钾作为磷和钾的来源,硫酸镁提供镁和硫,钼酸钠作为钼的来源。这种矿物盐基础使产品与寻求由熟悉、园艺标准成分制成的直接促花刺激剂的种植者保持一致。

FloraFlex Bulky B 非常适合需要水溶性促花刺激肥料以支持开花初期和中期,尤其是在灌溉式花园中,有针对性的开花期营养补充剂有助于保持花卉营养精确的种植者。

产品优点:开花期;室内;室外;常规浇水;灌溉系统;水培;椰糠安全;土壤;无土;开花支持;额外磷钾支持;更多花朵;更密实的花朵;滴灌友好;效果稳定;开花早期营养;花卉能量。

保证分析:有效磷(P2O5):14.0%;可溶性钾(K2O):43.0%;总镁(Mg):1.0%;硫(S):11.0%;钼(Mo):0.001%;钠(Na):1.0%。

源自:磷酸二氢钾;硫酸镁;硫酸钾;钼酸钠。

How To Use

How to Use FloraFlex 大包装 B - 5 磅

Step-by-step mixing and feeding instructions for FloraFlex 大包装 B - 5 磅.

Mixing & preparation

Fill your reservoir or watering container with clean, room-temperature water first. Shake the bottle of FloraFlex 大包装 B - 5 磅 well before every use. Using the feeding schedule below, measure the recommended dose and add it directly to the water while stirring. Allow the solution to mix fully before adding any other fertilizers, additives, or supplements.

Always add nutrients to water — not the other way around. Mix thoroughly between products to ensure an even, stable nutrient solution.

Week-by-week feeding schedule

Vegetative stage — Bulky B

  • Week 1: do not use this product during this week of vegetative growth.
  • Week 2: do not use this product during this week of vegetative growth.
  • Week 3: do not use this product during this week of vegetative growth.
  • Week 4: do not use this product during this week of vegetative growth.

Flowering stage — Bulky B

  • Week 1: mix 0.4 g per litre of water or nutrient solution.
  • Week 2: mix 0.4 g per litre of water or nutrient solution.
  • Week 3: mix 0.4 g per litre of water or nutrient solution.
  • Week 4: mix 0.4 g per litre of water or nutrient solution.
  • Week 5: mix 0.4 g per litre of water or nutrient solution.
  • Week 6: do not use this product during this week of flowering.
  • Week 7: do not use this product during this week of flowering.
  • Week 8: do not use this product during this week of flowering.

Tips for best results

  • Maintain pH and EC/ppm within the range recommended for your growing medium and crop.
  • Use fresh nutrient solution whenever possible and avoid leaving mixed solution stagnant for long periods.
  • Store nutrients in a cool, dark place away from direct sunlight and extreme temperatures.
  • Keep bottles tightly sealed when not in use to reduce air exposure and preserve product quality.
  • Use clean measuring tools and regularly rinse or clean your reservoir, lines, and irrigation equipment.

Common mistakes to avoid

  • Do not mix different nutrients or additives together in concentrated form before adding them to water.
  • Do not exceed the recommended dosage unless you are following a tested, crop-specific feeding plan.
  • Do not skip pH or EC/ppm checks when growing in hydroponic or soilless systems.
  • Do not allow the nutrient solution to freeze or overheat, as this can damage the formulation.
  • Do not ignore the directions on the product label for your specific crop, growth stage, and system type.

Warnings & Safety

Warning – Important Safety Information

This product may cause mild skin irritation and eye irritation. Avoid unnecessary contact with skin, eyes, and clothing. Use only as directed.

General safety precautions

Read and follow all instructions on the product label and any accompanying documentation before use. Keep out of reach of children and pets. Do not ingest. Avoid breathing vapours, mist, or dust that may be generated during handling or use.

Wear appropriate personal protective equipment (PPE), such as protective gloves, long sleeves, long pants and closed-toe footwear. When there is a risk of splashing or airborne particles, use safety glasses or other suitable eye and face protection.

First aid – skin contact

IF ON SKIN OR HAIR: Remove contaminated clothing immediately. Rinse skin with clean water for several minutes, then wash with mild soap and water. If irritation or redness develops and persists, seek medical attention. Wash contaminated clothing before reuse.

First aid – eye contact

IF IN EYES: Rinse cautiously with clean water for several minutes, keeping eyelids open. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, obtain medical advice.

First aid – ingestion and inhalation

IF SWALLOWED: Rinse mouth thoroughly with water. Do not induce vomiting unless instructed by a medical professional. Seek medical attention if you feel unwell.

IF INHALED: Move the person to fresh air and keep them comfortable for breathing. If coughing, breathing difficulty, dizziness or other symptoms occur, seek medical assistance.

Storage and handling

Store this product in its original closed container, in a cool, dry and well-ventilated area. Protect from extreme temperatures and direct sunlight. Keep container tightly sealed when not in use.

Avoid release to drains, natural waterways or outdoor soil. Dispose of unused product and empty containers in accordance with local regulations and the directions on the label.

Important: If medical advice is needed, keep the product label or container available. Always follow the specific instructions and safety recommendations provided by the manufacturer. This safety notice is intended as general guidance and does not replace official label directions or documentation.

Guaranteed Minimum Analysis

Frequently Asked Questions

What does available phosphate (P₂O₅) do for plant growth?

Available Phosphate (P₂O₅) supports root development, energy transfer, and early structural growth by providing a form of phosphorus that plants can absorb and use quickly.

Why is soluble potash (K2O) important for plants?

Soluble potash (K2O) is important because it helps plants control water use, move sugars to new growth and fruit, and build stronger, higher-quality structure under stress. It’s unique from many other nutrients because it acts more like a regulator and transport helper than a direct “building material,” so the biggest benefits show up as steadier growth, stronger stems, and better finishing instead of just bigger leaves.

Why is total magnesium (Mg) important for plant growth?

Total magnesium is important because magnesium powers chlorophyll and energy use, helping plants stay green, turn light into growth, and use other nutrients efficiently—and it’s unique because its problems often come from nutrient balance and uptake competition, not just a simple shortage.

Why is sulfur (S) important for plant growth?

Sulfur is important because plants need it to build key amino acids and proteins that drive real growth, strong structure, and efficient use of nitrogen, making it uniquely different from “look-alike” nutrients that may change leaf color without supporting the plant’s core building process.

Why is molybdenum (Mo) important for plant growth?

Molybdenum is important because it helps plants convert nitrogen into usable building blocks for chlorophyll and growth, and it’s unique from many nutrients because it mainly supports enzyme-driven “nutrient use” rather than directly building plant tissue.

Why is sodium (Na) important to manage in plant growing?

Sodium is important to manage because it can quietly build up in the root zone, making it harder for plants to absorb water and essential nutrients like potassium, which leads to slow growth and leaf burn. It’s unique from most nutrients because the problem is usually excess and imbalance—not a shortage—so fixing it often means preventing buildup and restoring root-zone balance rather than adding more feed.

What does monopotassium phosphate do for flowering plants?

Monopotassium phosphate provides fast phosphorus and potassium that support energy use, nutrient flow, and bloom development without adding nitrogen, so it helps flowering progress cleanly without pushing extra leafy growth. It’s unique because it delivers a focused PK boost in a highly soluble form, which can correct stage-related demand quickly, but it must be used carefully to avoid potassium-heavy imbalances that can block calcium and magnesium uptake.

What does magnesium sulfate do for plants?

Magnesium sulfate supplies magnesium for chlorophyll and sugar movement plus sulfur for protein building, helping plants stay efficient and green during high-demand growth. It’s unique because it adds magnesium without extra nitrogen or calcium, so it corrects magnesium issues with fewer side effects when balance is the real goal.

What does sulfate of potash do for plants?

Sulfate of potash supplies potassium for water control and sugar movement plus sulfur for protein building and quality compounds, helping plants finish stronger without adding chloride like some other potassium sources.

What does sodium molybdate do for plants?

Sodium molybdate supplies molybdenum, a trace micronutrient that helps plants convert nitrate nitrogen into usable building material, so growth and green color stay steady; it’s unique because it works as a tiny-dose “nitrogen unlocker” rather than a bulk nutrient.

查看完整详细信息
营养饲料表

Vegetative — Bulky B

Flowering — Bulky B

产品对比