Newmarket, Ontario (Head Office)
1175 Stellar Drive, Unit #5
Newmarket, ON L3Y 7B8
- Mon10:00am–6:00pm
- Tue10:00am–6:00pm
- Wed10:00am–6:00pm
- Thu10:00am–6:00pm
- Fri10:00am–6:00pm
- Sat10:00am–4:00pm
- SunClosed
您选择的取货地点缺货?我们会自动从其他地点调货,确保您选择的取货地点有货。(仅限安大略省)
无法加载取货服务可用情况
Dutch Nutrient Gro A 和 B 是一款双组分基础营养液,旨在促进植物在整个营养生长期的生长,尤其适用于幼苗、扦插苗和早期植物的茁壮发育。这款双组分植物营养液以清洁高效的形式提供全面的植物营养。
Gro AB 被誉为优质矿物质和营养素的理想混合物,旨在帮助植物在构建结构的同时达到最佳生长状态。它采用便捷的双组分配方,可最大限度地提高营养吸收率,这在植物生长期(即根、茎、叶形成期)至关重要。如果您希望植物的营养生长周期始终保持稳定,Gro A 和 B 将是您可靠的生长阶段基础肥料的理想之选。
Dutch Nutrient Gro A 和 B 旨在减少结块和凝固,从而提高配方中矿物质元素的利用率。它还能减少矿物质元素的浪费,使营养成分在两部分配方中更易于吸收利用。对于喜欢更简洁方案的种植者来说,“不含添加剂或色素”的理念有助于将重点放在植物营养上,而不是额外的填充剂或色素上。
营养成分表非常清晰:Gro A 的氮磷钾比例为 2-0-2,Gro B 的氮磷钾比例为 0-1-3,这强化了其作为真正的双组分基础营养素而非单一用途补充剂的定位。除了氮磷钾比例之外,该配方还明确地在 Gro A 中添加了钙,在 Gro B 中添加了镁,从而在不使产品成分复杂的情况下,支持植物生长阶段的均衡营养。
Dutch Nutrient Gro A 和 B 非常适合那些想要一种高度浓缩的双组分基础营养液的种植者,这种营养液专为幼苗和扦插而设计,其营养生长周期支持围绕最大生长和强大的营养吸收而构建。
Step-by-step mixing and feeding instructions for 荷兰营养剂 Gro B - 500 毫升.
Fill your reservoir or watering container with clean, room-temperature water first. Shake the bottle of 荷兰营养剂 Gro B - 500 毫升 well before every use. Using the feeding schedule below, measure the recommended dose and add it directly to the water while stirring. Allow the solution to mix fully before adding any other fertilizers, additives, or supplements.
Always add nutrients to water — not the other way around. Mix thoroughly between products to ensure an even, stable nutrient solution.
Vegetative stage — Gro B
Flowering stage — Gro B
Warning – Important Safety Information
This product may cause mild skin irritation and eye irritation. Avoid unnecessary contact with skin, eyes, and clothing. Use only as directed.
General safety precautions
Read and follow all instructions on the product label and any accompanying documentation before use. Keep out of reach of children and pets. Do not ingest. Avoid breathing vapours, mist, or dust that may be generated during handling or use.
Wear appropriate personal protective equipment (PPE), such as protective gloves, long sleeves, long pants and closed-toe footwear. When there is a risk of splashing or airborne particles, use safety glasses or other suitable eye and face protection.
First aid – skin contact
IF ON SKIN OR HAIR: Remove contaminated clothing immediately. Rinse skin with clean water for several minutes, then wash with mild soap and water. If irritation or redness develops and persists, seek medical attention. Wash contaminated clothing before reuse.
First aid – eye contact
IF IN EYES: Rinse cautiously with clean water for several minutes, keeping eyelids open. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, obtain medical advice.
First aid – ingestion and inhalation
IF SWALLOWED: Rinse mouth thoroughly with water. Do not induce vomiting unless instructed by a medical professional. Seek medical attention if you feel unwell.
IF INHALED: Move the person to fresh air and keep them comfortable for breathing. If coughing, breathing difficulty, dizziness or other symptoms occur, seek medical assistance.
Storage and handling
Store this product in its original closed container, in a cool, dry and well-ventilated area. Protect from extreme temperatures and direct sunlight. Keep container tightly sealed when not in use.
Avoid release to drains, natural waterways or outdoor soil. Dispose of unused product and empty containers in accordance with local regulations and the directions on the label.
Important: If medical advice is needed, keep the product label or container available. Always follow the specific instructions and safety recommendations provided by the manufacturer. This safety notice is intended as general guidance and does not replace official label directions or documentation.
| Available Phosphate (P2O5) | 1.0% |
|---|---|
| Soluble Potash (K2O) | 3.0% |
| Water Soluble Magnesium (Mg) | 0.5% |
| Molybdenum (Mo) | 0.0011% |
Available Phosphate (P₂O₅) supports root development, energy transfer, and early structural growth by providing a form of phosphorus that plants can absorb and use quickly.
Molybdenum is important because it helps plants convert nitrogen into usable building blocks for chlorophyll and growth, and it’s unique from many nutrients because it mainly supports enzyme-driven “nutrient use” rather than directly building plant tissue.
Soluble potash (K2O) is important because it helps plants control water use, move sugars to new growth and fruit, and build stronger, higher-quality structure under stress. It’s unique from many other nutrients because it acts more like a regulator and transport helper than a direct “building material,” so the biggest benefits show up as steadier growth, stronger stems, and better finishing instead of just bigger leaves.
Water soluble magnesium is important because it quickly restores the plant’s ability to make chlorophyll and produce energy, which helps stop interveinal yellowing on older leaves and improves overall nutrient use; it’s unique because it becomes available immediately in water, making it faster and more predictable than slower magnesium sources.
Magnesium sulfate supplies magnesium for chlorophyll and sugar movement plus sulfur for protein building, helping plants stay efficient and green during high-demand growth. It’s unique because it adds magnesium without extra nitrogen or calcium, so it corrects magnesium issues with fewer side effects when balance is the real goal.
Yes, it can if it pushes phosphorus too high or drives pH too low, because both conditions can reduce the plant’s ability to take up key micronutrients and calcium even when they’re present in the feed, which makes phosphoric acid uniquely powerful compared with slower, gentler phosphorus sources.
Potassium nitrate is often better for quick correction when the plant needs both potassium and fast nitrate nitrogen, because it dissolves cleanly and is taken up quickly, unlike potassium sources that don’t supply nitrogen. It’s unique because it can restore leaf color and growth momentum while also improving water regulation, but it can backfire if nitrogen is already high or if salt levels are already stressing the roots.
Potassium sulfate is often preferred because it supplies potassium without added chloride and also provides sulfur, which supports protein-building and efficient nutrient use, making it a cleaner, balanced option when plants are sensitive to chloride or when you want potassium without pushing extra nitrogen or phosphorus.
Sodium molybdate supplies molybdenum, a trace micronutrient that helps plants convert nitrate nitrogen into usable building material, so growth and green color stay steady; it’s unique because it works as a tiny-dose “nitrogen unlocker” rather than a bulk nutrient.

1175 Stellar Drive, Unit #5
Newmarket, ON L3Y 7B8
106 Saunders Road, Unit #2A
Barrie, ON L4N 9A8
719 Krosno Boulevard
Pickering, ON L1W 1G4
915 McLeod Avenue, Unit #4
Winnipeg, MB R2G 0Y4